Both my all-original 1957 Dodges have the deck lid stay open in any
position.
Jim
The Netherlands
'57 Dodge x2
-----Oorspronkelijk bericht-----
Van: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]
Namens eastern sierra Adj Services
Verzonden: vrijdag 3 augustus 2007 6:58
Aan: L-FORWARDLOOK@xxxxxxxxxxxxx
Onderwerp: [FWDLK] Deck Erection.....in ALL positions
Glenn Barratt PM'ed me, to ask me upon what reference I based my
statement that a PROPERLY working deck lid (nyah, nyah, nyah) would
hold any partially-opened position
in which an operator would place it.
>From the 57 Dodge Service Manual : " All Dodge [dunno about PLY's
though] cars have a balanced deck lid [ IN THEORY ] , made possible by a
torsion bar hinge mechanism. Lifting the deck lid is accomplished with a
finger tip--the weight of the heavy lid is counter-balanced in all
positions by the spring tension of the two torsion bars.
As the deck lid is raised [NOT whanged- upward ] , the twisting action
of the bars against the hinges causes the bars to twist, exerting a
torsional spring resistance that balances [!!] the lid.
WHEN LID HAS BEEN ADJUSTED CORRECTLY, LID SHOULD [ahem] HOLD ANY
POSITION WHEN RELEASED [emphasis-added] .
So THERE, you smug so-and-so's , with your deck lids that just go
UP,and stay up, whenever you want them to.
They don't actually perform like they're supposed to do!
At least, I got to watch MY deck lid perform correctly, for an hour, til
I closed the lid, on the newly-installed NOS T/bars!
The very next day: experienced the heartbreak Limp Deck Syndrome, all
over again!
Neil Vedder
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|
Back to the Home of the Forward Look Network