Re: [FWDLK] ADVICE ON STEERING GEAR REMOVAL
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] ADVICE ON STEERING GEAR REMOVAL



From what I understand, the overhaul of a P/S gearbox is no big deal, and O/H
kits are reportedly available.

About 10+ years ago, my car's OEM gearbox began leaking like a sieve, as evidenced by the P/S pump resevoir always needing a refill, with no leakage at the pump.

That said, and not knowing what-all is/was involved adjustment/bushing-wise in an O/H, AND not wanting to have my car's gearbox to get lost or damaged or otherwise NOT be able to be reinstalled in my car, and not wanting my car to be non-drivable for any prolonged time.....(in other words: trying to avoid any unpleasant surprises).....

I bought a w.y. gearbox from Moore's in SD, for $250.00, and had THEM ship it to Lares, where they proceeded to charge me $600.00 (!!--dunno what they charge, now) for the O/H
of that gearbox; their standard price for the job.

When I received it from Lares (within about a reasonable 3-weeks after buying it, at Moore's, and, actually seeing it for the first time) I found that Lares had painted it gloss black, right over the nasty oxidized finish of that w.y. piece.

I stripped the paint off, easily enough, and then wire-wheeled the gearbox case to a bright-
shiny appearance, and then clear-coated it.

Took my like-new, now, w.y. gearbox to my local car-shop and they had no difficulties in removing
my car's 45 y.o. (?-then) OEM gearbox and installing Lares' gearbox.

I had some concern about how well that O/H'ed w.y. guy would work , but it has operated perfectly, and with great precision (that's right: I said precision ; with a rebuilt suspension, H.D. strut bushings from Just Suspension, and gas shocks, and a positive-caster alignment and good tires, your car, too, can have mind-boggling, take-your-hands-off-the-wheel, center-feel
straight-line steering performance).

So, despite the costs involved (down-time was nil thanks to the purchase of that donor-gearbox) I continue to be very satisfied with Lares' work----notwithstanding their cheapo effort to paint
over the corrosion on that w.y. gearbox.

And, I still have my car's OEM gearbox to use as an O/H candidate, or to sell to anyone who
wants to replicate my O/H protocol.


Neil Vedder



debenson2 wrote:
I just did that job on a 55 New Yorker...
Was fairly painless, but you do need to remove the steering wheel to free the nut at that end, pull the column down thru the floor board, 4 bolts 7/16" on the cover there 4 bolts on the clamp at the dash support, 3 bolts on the frame 5/8' on the outside and 13/16" on the inside if yours are like the 55 none were too tight or frozen, but they can be dirty and grease caked.....
The hardest part was separating the joint at the steering linkage.
Who will do your rebuild? Have you gotten any cost quotes?
Dave H recommends "Lares Corporation" http://www.larescorp.com/index.html they are close to me but just wondering about price. debenson2
431056
Brooklyn Park, Minnesota 55443 USA
debensonii@xxxxxxxxxxx <mailto:debensonii@xxxxxxxxxxx> road2recovery.us
763/438/6671

    ----- Original Message -----
    *From:* Ed Eckerson <mailto:eddee@xxxxxxxxxxxxx>
    *To:* L-FORWARDLOOK@xxxxxxxxxxxxx
    <mailto:L-FORWARDLOOK@xxxxxxxxxxxxx>
    *Sent:* Thursday, September 11, 2008 11:26 AM
    *Subject:* [FWDLK] ADVICE ON STEERING GEAR REMOVAL

    Hello Group
Unfortunately my power steering mechanism in my 59 PLYMOUTH is
    leaking and needs a rebuild.
The removal of the box seems clear and not too hard since the
    egine is out of the car,,but any words of experience???
Can I leave the steering wheel and upper column intact and do
    everything by lowering the mechanism out from underneath??
Thanks to all
    ED ECKERSON
    LI  NY

    *************************************************************

    To unsubscribe or set your subscription options, please go to
    http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
    <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 <http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1>


*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.