Re: [FWDLK] Power Windows

I bought repro rubber sleeves to route wires from the door power windows to the door post. I used a metal hole drill and there is a dimple in the door post and door where you need to drill. Door has to come off. I think it was an 1 inch hole, but wait until you get the sleeves which I bought from that fellow in Montana. I think he is out of business. If you can't find repro sleeves, you can make them out of rubber hose with rubber washers at each end to hold them in place. Glue the washers in place so the sleeve does not come out of the hole.

In a message dated 10/7/2015 5:30:07 P.M. Eastern Daylight Time, ken.rimington@xxxxxxxxxxxxxx writes:

I have a parts car, 1956 Dodge Royal, with power windows. I want to install the windows on my 1956 Dodge Custom Royal. What alligators await my effort? My doors are not drilled for the cable tube. Is there a better way of getting the cables out of the door? Spring loaded contacts? Has anyone made this conversion before?



Kenneth G. Rimington             Orbital ATK Launch Systems

Electrical Design Engineer              PO Box 707, Mail Stop: UT40-B/1/H-21

Test Instrumentation and Integration    Brigham City, UT 84302-0707

ken.rimington@xxxxxxxxxxxxxx     (435) 863-6592

Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, that data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed or copied to foreign nationals, residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication. Thank you.
********** **********

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!