Re: [Chrysler300] 1962/63/64 Power Rear Antenna Talk
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1962/63/64 Power Rear Antenna Talk

On 01/23/16 01:54, 'Rich Barber' c300@xxxxxxx [Chrysler300] wrote:


> While on the subject, I have a spare but non-functioning power antenna
> system for a ’64 Chrysler.  I’m trying to get to the bearings of the
> reversible motor which seem to be frozen.  I’ve got the antenna base
> loose from the motor but am stuck on digging into the sealed motor.
> Anyone been deeper into one of these on a DIY basis?  I’m hoping that a
> little persuasion on and lubrication of the shaft bearings will return
> the system to functionality.  The lower adapter/bezel is pot metal and
> designed to only go together the correct way.

> Also, the switch for this system was a challenge to get to and was also
> frozen.  Persuasion and lubrication returned it to functionality.

> Good luck with your quest.

> Rich Barber


Keep the acetone Mix OUT of the armature of the motor,
You DON"T want it eating the varnish Type coating of the
windings, This Just might be a biggy!!!

Paul Holmgren
My Train of thought Derailed, there were No Survivors

Posted by: paul <paulholm@xxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap