Re: [Chrysler300] 64 windlace installation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 64 windlace installation





It’s possible to glue in all or part if you don’t want to remove the dash. Dont hold your breath with SMS. I just received my door panels that were sent to them to be redone in May 2018. 

Sent from my iPhone

On Aug 9, 2020, at 4:38 PM, ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

Another question I am loathe to ask, since I think I know the answer!

Just disassembling the dash as I prepare to sand the bottom half. I have new wind lace ordered from SMS (and still awaiting) and was just snooping around to see how exactly this comes out and re-installs.

It appears to me that the entire dash assembly has to come out to get at the mounting clips that hold the wind lace to to the A pillar jamb, plus the glue of course.

Say it ain't so!

Al



__._,_.___

Posted by: Greg <picgrego@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.