RE: [Chrysler300] 64 windlace installation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 64 windlace installation

A friend just did the ones in his ’64 New Yorker wagon and he glued them in. The originals have a cardboard flange sewn on that goes between the dash frame and the body. The ones he got did not have them. I got ones for my 300F from Gary Goers and they did have the flanges on them. I don’t know if Quirey is making them or not.


From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Greg picgrego@xxxxxxx [Chrysler300]
Sent: Sunday, August 9, 2020 1:58 PM
To: ALLAN POZDOL <apozdol@xxxxxxxxxxx>
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 64 windlace installation



It’s possible to glue in all or part if you don’t want to remove the dash. Dont hold your breath with SMS. I just received my door panels that were sent to them to be redone in May 2018. 

Sent from my iPhone

On Aug 9, 2020, at 4:38 PM, ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Another question I am loathe to ask, since I think I know the answer!


Just disassembling the dash as I prepare to sand the bottom half. I have new wind lace ordered from SMS (and still awaiting) and was just snooping around to see how exactly this comes out and re-installs.


It appears to me that the entire dash assembly has to come out to get at the mounting clips that hold the wind lace to to the A pillar jamb, plus the glue of course.


Say it ain't so!




Posted by: <nick@xxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.