Re: {Chrysler 300} Transmission seal in a 62
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Transmission seal in a 62



That's an easy one to miss. It drips out of there and spreads along the pan gasket. When changing these you may have to loosen the band adjustment to take tension off the pin. Be careful not to push the pin out to far, or it may come out of the band anchor. You also have to remove the tail shaft housing of coarse.

Don



I agree with Carlton about replacing the reverse band lever O-ring.  I had my 63 Torqueflite rebuilt back in 1998.  For the next 20 years I tried to figure out where it was leaking up to 1/2 quart over the winter storage.  I replaced numerous oil pans and gaskets and each time I would swear it was the pan leaking never being aware of a small O- ring .  Even a complete wipe down of the trans housing never allowed me to see a trail from the rear of the shaft.  My local Aluminum trans expert identified the cause and came and showed me how it can be replaced with out removal.  
So be sure and replace that O-ring no matter how good it may look.  
Pictures are provided.  O-ring #3 may be your problem.
image0.jpegimage1.jpeg

Sent from my iPhone

On Jan 12, 2024, at 7:19 PM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:


i agree , those guys are great on aluminum one  and related stuff , but no one beats our own Don V on the iron 
ones . jg 
Sent from my iPhone

On Jan 12, 2024, at 3:31 PM, 'Everend Thorne' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


For transmission parts, including O-rings, I've had good success with A&A Transmission in Canby, Indiana (Home - A&A Transmissions). They were even able to help me with mounting parts for my 62 trans installation.

Randy,




On Friday, January 12, 2024 at 11:56:26 AM CST, schroe99@xxxxxxxxxxxx <schroe99@xxxxxxxxxxxx> wrote:


Hi Carl,

I’ve been working quite a while to finish restoration of my H which included an engine and trans rebuild.  After running and breaking in the engine I found  a trans leak at the back end of the trans.  I learned there is a small O-ring seal back there that often gets over looked in the rebuilding.   If that happens to be where your leak is occurring I believe that O-ring can be replaced without removing the trans.  I haven’t done that yet and I intend to have the mechanic who helps me a lot help me replace the seal. 

Hope you get more input.

Best,

Carlton Schroeder

Eagle River, WI   

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Drew Carl
Sent: Wednesday, January 10, 2024 11:13 PM
To: Chrysler list server <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Transmission seal in a 62

 

I have a 62 300 with a 413 but not the H. I do not know what transmission it has by model. It is leaking a lot of fluid when parked. I think the seal causing this can be replaced without opening up the transmission? Does anyone have advice on where to acquire the proper seals and if I am correct in thinking I can pull the transmission, replace the seal and put it back in or if this is a more involved job.

 

<image001.jpg>

Drew Carl
Owner, eScore 

Phone: 724-288-6636

Email: drew@xxxxxxxxxxxx

Website: www.escoremx.com

Address: 1280 Henderson Avenue Washington, PA 15301

 
<image003.png>

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1acda01da444c%24e8e27750%24baa765f0%24%40escoremx.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/005a01da449b%2470630c50%24512924f0%24%40newnorth.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1550389836.961378.1705091472205%40mail.yahoo.com.
<image003.png>
<image001.jpg>
<image002.png>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/A3E7E609-0AC3-432C-A0FA-1DC86F429345%40gradyresearch.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/6FCFFBF6-3D9E-4EE2-9AA1-C61BF6FEB9E0%40aol.com
.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/590744773.599766.1705155092089%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.