Re: distributors for 318 poly engine
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: distributors for 318 poly engine



They are good units, but if one dies on you, you can't get parts at the local parts store.  With the Mopar electronic system, an orange box is usually available anywhere!!!
 
Bob K
----- Original Message -----
From: Bill M
Sent: Wednesday, April 11, 2012 8:08 PM
Subject: Re: distributors for 318 poly engine

I might be the minority, but I will never use another Pertronix again. I had 2 die on me and I just can't trust them. Just my $0.02

Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 92 Accord, 06 Mazda 3


On Wed, Apr 11, 2012 at 5:25 PM, Herb <zephyr9900@xxxxxxxxxxx> wrote:
Before you spend all that money on something you may not want, take a look at a Pertronix unit for converting a factory distributor from points to electronic ignition.  If you want to keep your car stock in appearance, Pertronix is what you need because you wont need to hide boxes and wiring and modify your wiring harness, because all that is inside the distributor.  Now if you don't care about stock appearance and have extra dollars to spend go with the MoPar Performance unit.  I have 6 cars that I have installed Pertronix units and several others that I no longer own and have never had a problem with any of them.  That said I have read about others that have had a less favorable experience with Pertronix units, as well as MoPar units.  Also you are not restricted to Poly distributors as any A or LA will interchange, that means any MoPar small block will work.  Just my $0.02 worth.
 
 
 
 
      Herb
 
1954 DeSoto Firedome Estate Wagon 276 HEMI
1956 Plymouth Belvedere 361 4-Sale
1959 Coronet 326 Poly
1961 Belvedere Custom Suburban Wagon 318 Poly
1961 Dodge Dart Pioneer Wagon 318 Poly
1963 Fury 2D/HT 7.0L
1963 Sport Fury Convertible 361
1970 Chrysler 300 Hurst 440
1979 Dodge Aspen R/T Sport Wagon 360
1999 Durango SLT 5.9L
2008 SRT-8 Magnum 6.1L
St. Louis, MO.
 
 &
 
 
 
-------Original Message-------
 
Date: 4/11/2012 3:54:51 PM
Subject: Re: distributors for 318 poly engine
 
Sure do!!!  Pick up a kit to change over to Mopar electronic ignition. the
small block kit fits great.  I'm running one in my 64 Belvedere poly.  You
can get them from Mancini, Summit, Jeg's, etc.
the kit is complete, includes distributor, orange box, correct ballast
resister, and wiring harness.  also includes easy to use instructions.
 
Bob Kinker
----- Original Message -----
From: "Laborboy" <laborboy@xxxxxxxxxxxxx>
To: "The 1962 to 1965 Mopar Mail List Clubhouse"
Sent: Tuesday, April 10, 2012 10:31 PM
Subject: distributors for 318 poly engine
 
 
My stock points distributor in my 64 dodge went out, it was as loose
as a goose, and couldn't keep time worth a darn. Cannot find any "new"
distributors, just rebuilt, and the new one is no better than the old.
Any know of a source for new poly distribs? How about for electronic
distribs?
 
Zack in Chicago
 

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.