Re: Poly Oil Filter w/ TTI Headers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Poly Oil Filter w/ TTI Headers



Looks like Rich covered this one well. Have you made the modifications to the engine mount brackets yet as recommended by TTI. If not Rich has some good photos of that also.
 
Nick T.
 
 


From: "Bill M" <y1topbanana73@xxxxxxxxx>
To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Sunday, January 25, 2015 9:35:04 PM
Subject: Re: Poly Oil Filter w/ TTI Headers

Seems to me that I can get the same result of the fancy Canton oil filter plate by putting mine in my drill press and adding 4 holes...correct?

Not to hijack my own thread, but something that just dawned on me is that the trans to engine braces will likely not be able to be used with the TTI headers. Can anyone confirm?

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

On Sat, Jan 24, 2015 at 4:51 PM, <furyus63@xxxxxxxxxxx> wrote:
Gary,
 
I just don't know why vendors don't include the Poly when items will work. Maybe with some renewed interest in this engine thinking will change for the better and we will see changes in catalogs and websites.
 
Nick T.
 
 
 


From: "Gary H." <62to65mopar@xxxxxxxxxxx>
To: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Saturday, January 24, 2015 2:53:15 PM
Subject: Re: Poly Oil Filter w/ TTI Headers

Thanks for the update Nick. I did not mean to dis the vendor; just point out the catalogs of many vendors fail to include applications for the Poly. This case it seems it was intentional:  "anyone building one [a Poly] would know what  parts are interchangeable." They seem to sell quality items.

By " He said they don't see any completion Polys" ... I think you mean competition Polys?

Gary H.

>  -------Original Message-------
 
>  When my engine was built the filter was changed to a Pure Power remote
>  filter system. It took up to much room in the engine compartment and did
>  not look good. I no longer had the original filter plate so I went to
>  Canton Racing which is only a half hour drive. The sales rep. knew what I
>  needed and handed me a unit for a small block wedge and said this will
>  handle more than 3 times the oil flow. Most all their parts are made for
>  circle track racing, quality parts for big dollar racing engines. He said
>  they don't see any completion Polys but anyone building one would know what
>  parts are interchangeable. Very friendly place too. Just think, drive
>  another 15 minutes and your at Moroso's showroom for more fun parts not
>  listed under Poly.
>  
>  
>  Nick T.

-- 

--

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.