|
MO <micher@xxxxxxxxxxxxxxx>: Dec 19 10:56PM -0800
I would use the 516 heads. They are the right ones for a 426 wedge and can be bought pretty cheap. They are closed chamber. Have the larger exhaust valves installed and hardened seats on the ...more |
|
Jason Rhoades <Jason@xxxxxxxxxxxxx>: Dec 20 10:31AM -0500
Aero heads out of indy has a deal like 500 buck for complete recon heads. New parts you might look into them Jason Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone ...more |
|
"mrrodder@xxxxxxxxx" <mrrodder@xxxxxxxxx>: Dec 20 02:28PM -0800
I believe you'll find all 516 castings have the small 1.60 exhaust valves, not the larger 1.74 like the 452 castings. I also think you'll find that they do NOT have hardened exhaust valve seats. ...more |
|
MO <micher@xxxxxxxxxxxxxxx>: Dec 20 03:44PM -0800
Didn't you read my post about the 516 heads at all??? You will notice I covered the valve size and hardened seats are addressed. I used the steel shim head gasket on my low compression 440 ...more |
|
James Morgan <jwm1969@xxxxxxx>: Dec 20 04:47AM
Yes. They restored the instrument cluster bezel for my '63 Fury. (see attachment) James W. Morgan jwm1969@xxxxxxx From: Eric Sturgis <ericsturgis@xxxxxxxxx> To: Chrysler Group ...more |
|
<62-65-mail-list-club@xxxxxxxxxxx>: Dec 20 11:32AM -0600
Instrument Specialties have been listed on the site's vendor page for a long time. Which is a good sign imho. I have not used them though. Thanks, Gary H. ...more |
|
Michael LeFevre <493mike@xxxxxxxxx>: Dec 20 12:21PM -0500
Hi Dave, I finally found my mirror, it was in the first box I'd previously looked in, of course! I have attached 3 photos of the base. Thanks. Mike ...more |
|
MO <micher@xxxxxxxxxxxxxxx>: Dec 19 11:02PM -0800
That size of Dodge Red Ram Hemi is pretty small compared the the Chrysler ones...........................MO On Saturday, December 19, 2015 at 11:45:39 AM UTC-6, 64ragtop wrote: ...more |
|
D J <djohn14296@xxxxxxxxx>: Dec 20 08:48AM
Not as tough putting in as you all make it out to be. It is small than the 318 poly. Maybe just new motor mounts and headers. I put a 331 hemi in a 65 Coronet, that was all I needed. DJ ...more |
|
Richard Kinsley <leroarkinsley@xxxxxxxxx>: Dec 20 01:57AM
Today I got my new A-team members, Gabe, 14 and Ethan, almost 15 to help me remove the engine from LeRoar. All went well and it's looking good so far. The new garage heater makes it nice and cozy ...more |
|
MO <micher@xxxxxxxxxxxxxxx>: Dec 19 11:08PM -0800
Rich , I am glad that you are mentoring these two young men in the Mopar way. They will learn more from "hands on" than any book will. I wish I had a apprentis to do the grunt work ...more |
|
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. |
Back to the Home of the Forward Look Network