Abridged summary of 1962to1965mopars@xxxxxxxxxxxxxxxx - 8 updates in 2 t
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Abridged summary of 1962to1965mopars@xxxxxxxxxxxxxxxx - 8 updates in 2 topics

1962to1965mopars@xxxxxxxxxxxxxxxx Google Groups
Today's topic summary
View all topics
Dragstrip Simulator Run Needed
Akron Don <dongallimore@xxxxxxx>: Apr 13 06:46AM -0400

Going to have a dyno run done on my upgraded 440 in the next week. Anyone willing to run a simulation for me? Or recommend an affordable simulator?
Engines has gone from mildly ported cast iron 452 ...more
carverex@xxxxxxx: Apr 13 04:46AM -0700

Hi Don
Did Steve Dulcich ever follow up with you after Columbus? I seem to
remember you did the Dyno challenge and Dulcich Diagnosed some valve train
issues. I was just curious how all that ...more
<62-65-mail-list-club@xxxxxxxxxxx>: Apr 13 08:35AM -0500

There are some online versions, for example http://horsepowercalculators.net/the-horsepower-calculator/virtual-engine-dyno/virtual-engine-dyno-membership but I don't know any to recommend.
"Gary Pavlovich" <glpavlovich@xxxxxxx>: Apr 13 03:40PM -0700

Sounds exciting Don. Do you have 93Octane pump gas out there?
Unfortunately, we have 91 unleaded swamp water in CA but I plan on using
10.5 anyway - with TORCO.
Gary Pavlovich
Donald Gallimore <dongallimore@xxxxxxx>: Apr 13 11:26PM

I sent him an e-mail that kinda asked for a response and he didn't respond. I was disappointed but I had the situation handled. 
I have to admit that his unsolicited suggestion on his part at the ...more
Donald Gallimore <dongallimore@xxxxxxx>: Apr 13 11:41PM

Yes, we have 93 octane here, Many brands. About $0.50 a gallon more than 87 octane but sure beats $7,50 to $15 for race gas.
Building this engine has been a challenge. Everyone seems to forget the ...more
"Gary Pavlovich" <glpavlovich@xxxxxxx>: Apr 13 05:00PM -0700

Yes, you are blessed to have 93 octane. I am lured by thoughts of running 11-12 to 1 compression with TORCO but I think common sense should persuade me to be more realistic; 10.5 to 1 with a ...more
Back to top
Early wedge in Hot Rod
Travis Rice <majorbluemax@xxxxxxxxx>: Apr 13 10:00PM

How about a 4x4 barrel manifold
Enjoy, Travis
Back to top
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.

Home Back to the Home of the Forward Look Network