Re: IML: reproduction wire and wiring sources
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: reproduction wire and wiring sources



The current YNZ web site catalog shows the following:

1959 300, Imperial
Main Harness ...................................................... 936.00
Taillight Harness - 2 dr. Hdtp (300) .....................267.00
Power Window - 2 dr. Hdtp (300) .......................302.00

1959 Imperial & LeBaron
Main Harness ...................................................... 936.00
Taillight Harness – 4 dr. LeBaron ........................310.00
Taillight Harness w/Power Top - Imperial ............310.00
Power Window - Conv. .......................................329.00
- 4 dr. .........................................329.00
Air Conditioning Harness ......................................51.00
Auto-Pilot Speed Control ......................................36.00
Power Antenna ...................................................... 42.00

1959 Crown Imperial
Main Harness .................................................... 1126.00
Taillight Harness - 2 dr. .......................................267.00
Power Window - 2 dr. ..........................................329.00
Power Seat - 2 dr. ............................................... 111.00 Power Antenna ...................................................... 36.00

Maybe when they duplicated mine from my old harness that provided them with a pattern and now they can offer reproduction harnesses at slightly lower prices.

- Charlie Hansen
1959 Imperial Le Baron

On Aug 7, 2006, at 11:53 PM, Clint and Laurie Carter wrote:

Okay, so if I'm reading this right, a new harness from YNZ would be about $2,000? Is that about average? Another question: since YNZ made a harness for a '59 LeBaron, is it possible they could use that pattern for my '59 Crown (4-door sedan)? I know I'm going to need one for my '59 as it appears
there was a fire in the car at one time.

As intriguing as it sounds to make my own (and I love puzzles!) I don't
think an Imperial is the place for a beginner, yes?

Thank you,
Laurie Carter
Ilwaco, WA USA
'59 Crown (mine)
'65 Crown Coupe (his)

----- Original Message -----
From: <dansgarage@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>

----<snip>----
I will probably go the YNZ route and just bite-the-bullet for the cost.
Besides, if there are about $300-350.00 in parts costs alone, another
$1200-1500.00 for the labor involved is not too rediculous by todays
standards.




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.