RE: IML: '62 Imperial Taillight Bulbs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: '62 Imperial Taillight Bulbs



Since I just did them on my ‘62 LeBaron a few weeks ago it’s not that bad to tackle it.

Just remove the big Phillips head screw at the back of the chrome part.  That will loosen up

the red plastic part and it will come straight out with the wire.  Then remove the 3 small Phillips head screws from the back of the red plastic part and that will get you into the bulb socket for replacement.  As with any vintage plastic parts don’t tighten it too tight or it will bust it!

 

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of M Turner
Sent: Monday, October 16, 2006 6:23 PM
To: Online Imperial Club
Subject: IML: '62 Imperial Taillight Bulbs

 

OK, call me a fool, stupid or crazy.  But . . . I have yet to figure out how to replace the bulbs in my '62 Imperial.  Surely you do not have to disassemble the entire tail light assembly ... I hope!

Vince in Boston

 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.