IML: Removing a 56 Steering Wheel

[Jeff Cantor <jcantor791@xxxxxxxxxxx>]

I'm hoping someone can help me with a very specific question.  I own  
two 56 sedans, one a condition 3 according to the recent set of posts  
(I really like those definitions!) and one a condition 6 (read parts  
car).  On the first, I need to pull the steering wheel to make some  
repairs to the turn signal switch and on the second I'd just like to  
pull the wheel as one of the many salvageable parts on the car.  My  
problem is that the standard steering wheel puller I have does not  
seem to contain the correct bolts for this operation.  The ones that  
are long enough to reach into the wheel and still mate with the  
puller aren't the right thread and all the rest are too short (and  
probably also the wrong thread from what I can tell).  Does anyone  
know what the correct thread is or can anyone point me towards a  
specific brand and model of tool that they KNOW contains same?

Thanks!
Jeff
'56 Sedan
Trenton, NJ


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm