AW: IML: AW: How to line up the steering column jacket of a 60 IMP?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: IML: AW: How to line up the steering column jacket of a 60 IMP?



That is exactly my experience, besides two broken switches ... 
This design is very weak ( not at all *imperial*, if you understand me ..) 

Dietmar 
1960 fds 

-----Ursprüngliche Nachricht-----
Von: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] Im Auftrag von Rob van der Es
Gesendet: Donnerstag, 30. August 2007 15:42
An: mailing-list@xxxxxxxxxxxxxxxx
Betreff: Re: IML: AW: How to line up the steering column jacket of a 60 IMP?

Well Dietmar,

The swich aint the problem here, since I have a brand new one in front of me

:)
Problem is that it doesn't line up properly with the nylon cam in the 
steering column..
So it won't be activated and thus don't work :)

60 Imps are big fun :)

Robert
----- Original Message ----- 
From: "dietmar frensemeyer" <StadtApoAchern@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, August 30, 2007 3:30 PM
Subject: IML: AW: How to line up the steering column jacket of a 60 IMP?


I did not succeed to get a runnig cancel switch and gave up ..
1960 Imperials are great but some parts are not..

Dietmar

________________________________________
Von: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] Im Auftrag von Rob van der Es
Gesendet: Donnerstag, 30. August 2007 15:10
An: mailing-list@xxxxxxxxxxxxxxxx
Betreff: IML: How to line up the steering column jacket of a 60 IMP?


HI Folks,

I have a question about the steering column jacket of my 1960 Imperial.
You see, since I bought my car 2 years ago I have to cancel my turn signal
switch by hand.
My horns weren't working either.
The problem was a missing turnsignal cancellation switch that also has the
brass roller that acts as a conductor for the horn wire.

The horn problem was temporarily solved by running a separate wire form the
contact in the steeringwheel pad to the horn relay..

A couple of days ago I tried to install my brand new NOS turn signal
cancellation switch but I noticed that the nylon cam inside the column
doesn't
line up with the hole in the outer jacket.
So the switch won't work this way.

Does anyone have an idea how I can correct this problem ?
Ofcourse I can use a small cutting wheel and make a new access hole in the
steering column outside jacket, but I don't like the idea too much...
Is there a way to align the outer jacket again with the nylon cam that
operates the cancellation switch?

Many thanks,

Robert
1960 Imperial

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.12/979 - Release Date: 29.08.2007
20:21



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.484 / Virus Database: 269.12.12/979 - Release Date: 29.08.2007
20:21
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.484 / Virus Database: 269.12.12/979 - Release Date: 29.08.2007
20:21
 


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.