Re: [FWDLK] '57 Chrysler hood alignment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] '57 Chrysler hood alignment



Tim,

You did not say which shop is rebuilding your hood hinges, but here is one
that specializes. I have never seen their work, but they claim to be
experts. I think it is a good idea to discuss your problem with any
prospective rebuilding shop and have them describe the process they use for
restoration to see if it addresses the problem or is only cosmetic.

http://www.sms-auto.com

Dave Homstad
56 Dodge D500


-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Tim Bowers
Sent: Thursday, April 11, 2002 6:58 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] '57 Chrysler hood alignment

We're about to the point of being ready to box up our hood hinges and
send them out for rebuilding, but before I do, I thought I'd check with
the list to see if anybody has any ideas.

I posted pictures of our hood alignment at
http://www.geocities.com/stellarrest/300hood.html    in the event I
can't explain very well.

We're working on a '57 300C, and have decided to mock up all the front
clip sheet metal prior to paint, to be sure we are happy with the
fit/finish of the panels.  It's been a good exercise to make sure all
the hardware, shims, etc. are already accounted for before we end up
banging all our freshly painted panels together.

Our struggle is with the rear hood line against the cowl.  I think we
have a good gap between the hood and the cowl, but when we lift the
hood, it immediately moves "back" instead of "up", and consequently
crowds against the cowl edge.  I talked with a shop back east  that will
install new rivets in our hood hinges and they "think" that will solve
our problem.  We do find a small amount of slop in the pivot points of
the hinges.  Although it seems small,  perhaps it is enough wear when
it's multiplied over the 5 rivets in the hinge to be significant.
Before I plunk down customer's money on this service, I hoped I could
gather some collective wisdom from the group if anybody has already
dealt with this issue and might know what it is I'm misunderstanding.

Thanks for any help.

Tim Bowers
KS

-- -- -- -- -- -- -- --
Calendars are still available.  Don't miss the chance to get yours now!
Details for ordering may be found at:
http://www.forwardlook.net/calendar2002/index.html

-- -- -- -- -- -- -- --
Calendars are still available.  Don't miss the chance to get yours now!
Details for ordering may be found at:
http://www.forwardlook.net/calendar2002/index.html



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.