Re: [FWDLK] rocker panels

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

Dave & Tracy wrote:

> Being a fabricator/welder by trade ( journeyman ) , I would be cautious
> about the gauge of Steel used. I would not rule out going to a proper sheet
> metal shop where they can cut & fold the Rocker panel properly. Some time
> last year I welded up a 59 Pontiac , this came with a pair of aftermarket
> Rocker panels that were the ready to weld type !.
Subject: Re: [FWDLK] rocker panels

> > Don't overlook JC Whitney, for rockers. It's a LOT easier to call them
> > toll-free, & discuss your needs, than to try to work-thru their
> > complicated website-they subcontract thru a manufacturer, and actually
> > place the order, so there's some lead-time involved.
> >
> > The price? about $29.95!
> >
> > Neil Vedder
ALSO!!!!!!!!!   Some replacement rocker panel parts are Meant To Be
CAPS, rather then a
direct replacement where you have to totally remove the old one first.


--
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps L#6

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1