Re: [Chrysler300] Radiator Hose Clamps
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Radiator Hose Clamps





Gary Goers had good ones of those clamps.
Fern
 
 
Sent: Tuesday, January 30, 2018 8:29 PM
Subject: Re: [Chrysler300] Radiator Hose Clamps
 
 

John,
 
I agree that a lot of Chinese stuff is pure junk and they know when they make it. But we love that it's so cheap and buy it anyway.
 
I don't know where mine were made offhand, but they seem to have sealed perfectly for six years now. If they were made in China, they must have come from a rare wire company that cares. I have quite a few of them and can help some out who need them.
 
Keith Boonstra
 
-
 
On Tue, Jan 30, 2018 at 9:14 PM, John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Agree , all the retro reproduction wire clamps are junk . No spring temper , just bent wire from China . Had same experience , gave up . Many of the originals have been “sprung” by opening them too much takes steel in the wire  beyond steel yield point — never work well again . You do need the right tool to control that .

Easy to ruin with pliers.
I do not like look t too much but have taken to using worm drive clamps and breaking off the tail left over , right at the clamp , and putting worm underneath . Looks a lot better than 1” tail hanging off
Sent from my iPhone

On 30 Jan 2018, at 5:26 pm, plotkin_associates@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@yahoogroups.com> wrote:

Tried to replace the screw type clamps holding the upper and lower radiator hoses in my 64 Chrysler 300K (413 cu in, 4 brl, no a/c). The repro spring type clamps that I bought fit but weren't tight enough to stop antifreeze leakings when the engine was started.  Any one have or know where to get original spring type clamps for a 64 300K that hopefully would have a tighter fit. Used are fine as long as tight. Need 4 of them. Thanks for any help.

Myron 


 


__._,_.___

Posted by: "Fern Rivard" <crc@xxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.